Vespel®/Graphite Ferrules - SP-22 (60% / 40%) Short Ferrules for Agilent Inlet

Products:

CRS --> Ferrules, O-Rings > Vespel®/Graphite Ferrules - SP-22 (60% / 40%) > Short Ferrules for Agilent Inlet

<< Back

Vespel®/Graphite Ferrules - SP-22 (60% / 40%) Short Ferrules for Agilent Inlet Vespel/Graphite ferrules are made from DuPont polyimide/graphite blended compounds. They are ideal for GC/MS interface applications because they are non-porous to oxygen. They seal with minimal torque and are not re-usable. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks. Two types of Vespel/Graphite are commonly used, one with 40% graphite and one with 15% graphite.

Details:

Short Ferrules for Agilent Inlets*	For Capillary Sizes - ID	Item No
1/16” to 0.3 mm, 10/pk	0.10 - 0.18 mm	213163
1/16” to 0.4 mm, 10/pk	0.25 mm	213164
1/16” to 0.5 mm, 10/pk	0.32 mm	213165
1/16” to 0.8 mm, 10/pk	0.53 mm	213168
*short ferrules for Agilent inlet systems: 5890, 6890 and 7890.

CRS Product Sell Sht - Ferrules.pdf

Please note general ferrule sizing:

• 0.3 mm ID ferrules fit 0.18 mm ID capillary columns

• 0.4 mm ID ferrules fit 0.25 mm ID capillary columns

• 0.5 mm ID ferrules fit 0.32 mm ID capillary columns

• 0.8 mm ID ferrules fit 0.53 mm ID capillary columns

• Straight ferrules are used for packed columns

M. SNIR Technological Services Ltd.

Tel +972-4-8438991 Fax +972-4-8438994